Calculated-industries 4065 v3.1 User Guide Manual do Utilizador descarregar pdf (Página 10)

2 — C

ONSTRUCTION

ASTER

/ T

RIG

/ D

ESKTOP

Ç –

Change Sign (+/–)

— Toggles the sign of the dis-

played value to positive or negative.

Ç +

Pi (

)

— Constant = 3.141593

Ç •

Degrees:Minutes:Seconds (dms deg)

—

Converts between D:M:S and decimal degree formats.

Ç 0

Total Cost (Cost)

— Calculates total material cost

given a unit dimension and an entered Per Unit Cost.

Ç ß

Access Preference Settings (Prefs)

— Used to

access various customizable settings, such as

dimensional answer formats (see Preference

Settings on page 83).

Memory and Storage Functions

Cumulative Memory

— Whenever the µ key is

pressed, the displayed value will be added to the

Memory. Other memory functions:

FUNCTION KEYSTROKES

Add to Memory µ

Subtract from Memory Ç µ

Recall total in Memory ® µ

Display/Clear Memory ® ®

Clear Memory Ç ®

Memory is semi-permanent, clearing only when you:

1) turn off the calculator;

2) press ® ®;

3) press Ç ®;

4) press Ç x

(Clear All)

When memory is recalled (® µ), consecutive

presses of µ will display the calculated average

and total count of the accumulated values.

ß 1 – 3

Storage Registers (M1) through (M3)

— Stores

the displayed value in non-cumulative, permanent

Memory (e.g., 1 0 ß 1). Good for storing a

single value, for future reference (® 1 = 10).

Note: Non-cumulative means it only accepts one value (does not

add or subtract) and a second entered value will replace the first.

Permanent means the value is stored even after the calculator is

shut off. To delete a stored value, enter a new value or perform a

Clear All

(Ç x )

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 109 110

Comentários a estes Manuais

Sem comentários

Calculated-industries 4065 v3.1 User Guide Manual do Utilizador Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com Calculadoras, organizers Calculated-industries 4065 v3.1 User Guide